At the end of June 2022, our company shipped a 56-meter nylon conveyor belt with a bandwidth of 800mm to a coal mine in Brazil for the transmission and transportation of mining materials.

  Nylon conveyor belt, the middle canvas is nylon canvas.

  Nylon (NN) conveyor belt has the characteristics of thin belt body, high strength, impact resistance, good groove formation, strong inter-layer adhesion, excellent flexibility and long service life.

  It is suitable for medium and long distances and high load capacity. , transporting materials under high-speed conditions, widely used in mining, coal fields, chemical industry, metallurgy, construction, ports and other departments.

  Nylon conveyor belt refers to during the production process the conveyor belt has been made into endless conveyor belt with no joints, its belt core joint strength could reach 90% of its belt strength. There are not obvious joint defects on the surface of the belt, thus belt could transport balanced, using extension grow small, belt core is mad of high quality cotton or cotton-woven canvas.

  Nylon conveyor belt should not be started with overloading; don’t let the materials cover the rollers, keep the roller lubricated that avoid to cause the inflexible rotate. The time when conveyor belt deviate the conveyor belt need to be corrected in time to avoid the breakage of the conveyor belt and affect the working further. When the conveyor belt is found to be damaged have to be repaired in time, to avoid the damage to be expanded and affect the normal operation. To pay attention to the frame, the pillars or block materials form blocking the endless conveyor belt.

  The operation speed of conveyor belt is usually less than 2.5m/s. large lumps and abrasiveness and the use of fixed-type unloading devices. The speed should be adapted as low as possible. The relationship between the diameter of the conveyor’s transmission roller and the conveyor belt fabric, the matching of transmission roller, reversing roller and the design requirements for the groove angle of the idler should be reasonably selected according to the design regulations of conveyor. The feeding direction should be along with the operation direction of the conveyor belt, in order to reduce the impact of the material falling that should be applied a chute to reduce the falling distance of falling materials.

  Conveyor belt should be shorten the gap between the roller and applied the buffer roller to prevent the materials leakage. The side should be used the soft baffle plate from being too hard and scratching the belt surface of the conveyor belt. There are various transported materials by the nylon conveyor belt generally transported the accumulation density at 6.5~2.5t/m3 of variety bulk, granular, powdery and other loose materials. They can also be used to transport finished items. Products of various materials can be transported and have their own advantages and features that easy to be operated and convenient improve the produce effectively and work efficiency.