Introduction to the international standard of the baffle conveyor belt
2024-10-21 17:52In June 2021, our company shipped a 52-meter sidewall conveyor belt with a bandwidth of 1200mm to a cement plant in Austria for the transportation and delivery of cement.
It can continuously convey various bulk materials at any inclination angle from 0 to 90 degrees. It has a large conveying inclination angle, wide application range and small floor space.
It has the characteristics of no transfer points, reduced civil construction investment, low maintenance costs, and large conveying capacity. It solves the conveying angle that cannot be achieved by ordinary conveyor belts or pattern conveyor belts.
The corrugated edge conveyor belt can be designed into a complete conveying system according to requirements, avoiding intermittent conveying and complex conveying lifting systems.
Skirt conveyor belts are used in coal and mining industries, ports and terminals, building materials industry, food processing industry, environmental protection and waste disposal, automobile industry, and power industry.
Introduction to the international standard of the baffle conveyor belt
National standard of sidewall conveyor belt are the basis for us to purchase the sidewall conveyor belt, commonly sidewall conveyor belts’ standards need to be followed the nation standard. GB/T7984-2001, under this standard, usually if the product do not meet this standard then this product is unqualified, when we purchase rubber products, these standards ensure better usage and a longer service life.
Every product and equipment with its standards so does equipment. This sidewall conveyor belt is made of upper and bottom cover agents, core belts and other four parts. The thickness of their covering glue is also standardized. GB/T5756-2009 conveyor belt academic term and definitions, GB/T5752-2013 conveyor belt design, GB/T32331-2015 fabric conveyor belt, belt thickness and each plies thickness test method. Commonly sidewall conveyor belt’s upper cover is 3-6mm, bottom cover thickness is 1.5mm-4.5mm. Also, need to meet the basic tensile strength, etc.
