In December last year, our company shipped a 46-meter flame-retardant conveyor belt with a bandwidth of 1200mm to a cement clinker plant in Canada for the transportation of cement clinker.

  Flame-retardant conveyor belts, also known as whole-core flame-retardant conveyor belts, are made of an integral belt core that is impregnated with polyvinyl chloride impregnated paste and then plasticized or vulcanized.

  It has the characteristics of high strength, large transportation capacity, and balanced transportation. At the same time, this product It has good flame retardant, antistatic, impact resistance, wear resistance, corrosion resistance and other properties. This product is mainly suitable for underground transportation in coal mines, and can also be used for material transportation in the metallurgical and chemical industries.

  Doing well in some preventive measure to prevent the failure of belt conveyor belt . According to the itself feature of conveyed materials to choose the materials of the conveyor belt, avoid to cause seriously wear from the materials to the conveyor belt. When materials transportation, inspect and check the materials to avoid some large, hard, sharp and other substances transported on the conveyor belt lead to scratched and wear on the conveyor belt.

  At the loading point could lower the dropping point of the materials appropriately to avoid the gap being too big when loading the materials, causing pressure to the conveyor belt, impact the tension of the conveyor belt. Inspecting the conveyor belt regularly, know the condition of the conveyor belt, deal with the problem part in a timely manner. Except the materials of the conveyor belt but also during the manufacturing the conveyor belt is divided into ordinary canvas conveyor belt, strong canvas conveyor belt, ordinary canvas conveyor belt could transported some abrasive materials. If it used for mining, it is recommended to use strong canvas conveyor belt. Belt can make conveyor belt last longer if using.

     Belt conveyor has a widely application, the transported materials are diverse and have variety of properties. If don’t select the corresponding materials, there will be some problems during the time of using flame retardant, or shorten the using life of flame retardant. In the daily production, the materials that are widely used of the conveyor belt is rubber conveyor belt, to meet the characteristic of the materials will cover with some corresponding colloids on the conveyor belt such as heat resistance, cold resistance, oil resistance, corrosion resistance.

  Flame retardant conveyor belt has the specifications and parameters, for usually the parameter of the flat belt conveyor is 400-1800mm, the parameter of inclined belt conveyor is 400-1400mm. According to the different requirements to choose the properly bandwidth. It deserved to notice that the width is wider the faster speed of the conveyor belt will be and the transportation volume will be large too. During the process of the production transportation, the edge of the conveyor belt always occurs the wear condition. The deviation of the conveyor belt was discovered it in time and no more damaged was caused. It is not so serious. Only replace the damaged part is enough it won not waste too much.

  Cracking caused by the conveyor belt deviation, this kind of damage is relatively minor and can be repair directly. When it happens should stopped the conveyor belt immediately to prevent the unnecessary damage. The one side caused seriously of the conveyor belt this situation is relatively serious need to replace the conveyor belt. If the width of the conveyor belt is wide could save the conveyor belt, according to the need to change the conveyor belt into narrow conveyor belt to be fully used it again.