The roller frame installation steps of belt conveyor are as follows:

Preliminary preparation:

1. First, need to confirm the installation position of the roller frame and determine the design layout plan according to the design drawings.

2. Prepare the tools and the equipment indeed for installation.

3. Using a drilling machine or a punching machine to drill holes near the marked support points, the hole depth is required to meet the design requirements.

4. Cleaning the hole and the surrounding gravel and other debris to ensure the roller frame is able to be installed firmly.

Installation of columns:

1. Align the base of the roller frame column with the support point and fix it with the bolts.

2. Make sure the column is vertical and horizontal which could check it with a level.

3. According to the design requirements, install the rest of the columns in sequence.

Install rollers:

1. Installing horizontal beams on the columns to make sure all the columns are on the same horizontal plane.

2. Fix the roller frame on the horizontal beams in sequence to make sure the position is accurate and straight.

3. When installing the rollers, need to take care of the spacing between the rollers, so that the conveyor belt could pass smoothly.

Adjusting and Fixing:

1. After finishing the installation, inspect whether the roller frame is horizontal and vertical.

2. If adjustment is required, use the adjustment bolts or gaskets to fine-tune until the requirements are met.

3. Ensuring all the bolts are firm, to prevent the roller frame from loosening during working,

Acceptance:

1. Checking the entire installation of roller frame whether it meets the design requirements and the standard.

2. Checking the installation quality of support point, ensure the stability of yje foundation.

3. Checking whether the roller installation position and the spacing of rollers meet the requirement.

4. For the parts that do not meet the requirements, they need to be repaired in a timely manner or resinstalled in time.

  In summary, the installation of belt conveyor roller frame requires preliminary preparation, installation of the foundation, installation of columns, installation of rollers, adjustment and fixing and final acceptance.

  During the installation process, operation must be carried out strictly according to the design requirement, and detailed inspections and adjustments, make sure installation quality of the roller frame reach the requirements. Ensuring the belt conveyor could operate normally and safe use.