In September last year, our company shipped a 60-meter flame-retardant conveyor belt with a width of 1000mm to a coal mine in Australia for underground transportation of coal.

  Flame-retardant conveyor belts, also known as whole-core flame-retardant conveyor belts, are made of an integral belt core that is impregnated with polyvinyl chloride impregnated paste and then plasticized or vulcanized.

  It has the characteristics of high strength, large transportation capacity, and balanced transportation. At the same time, this product It has good flame retardant, antistatic, impact resistance, wear resistance, corrosion resistance and other properties. This product is mainly suitable for underground transportation in coal mines, and can also be used for material transportation in the metallurgical and chemical industries.

  In the daily transportation, one of the common problem of the flame retardant conveyor belt is the conveyor belt slippage, it seriously affect the transportation effectively of the belt conveyor and it is easy to cause the failures of other belt conveyors.

  The reason lead to the flame retardant conveyor slippage are: too much water is sprayed, if there is too much moisture on the surface of roller or conveyor belt will reduce the friction between them and result in slippage. In some period, the transported materials exceeds the bearing range of the conveyor belt. The friction between the roller and the conveyor belt could make the conveyor belt continue to operate therefore the slipping occurs. If the conveyor belt wants to operate normally, the tension is necessary, if the tension is too tight or too loose will cause a series of failures of the conveyor belts.

  So in order to avoid the above mentioned slippage problem. During the time of operation should be avoid too much moisture occur on the belt conveyor, need to control the loading volume when material transportation, when the tensioning is adjusted maintain a certain degree of tension is fine. There is no need to over tighten. With the application is more and more widely of flame retardant conveyor belt.

  The daily maintenance of the flame retardant conveyor belt is important, doing well in maintenance of flame retardant conveyor belt could reduce the failure rate of the transportation process, and longer the service life of the flame retardant conveyor belt and improve the using efficiency.